FISC - Dillon

	Florida Industrial Scale Co.
	728 Industry Rd. Longwood, Florida 32750

ED-2000 Electronic Dynamometer

Compact and light weight due to inherent strength of stainless steel or aluminum alloy load link material. The ED-2000 Electronic Dynamometer is available in capacities from 2,000 to 100,000 lb. with selectable lb., kg, newton, or metric ton units of measure.

Information Request Form

Mechanical Dynamometer

Limitless versatility as a tension, traction, and weight measuring instrument. Model AP Dynamometers offer ą 0.5% of full capacity accuracy.

Information Request Form

Mechanical Crane Scales

The tough and accurate Model AP Crane Scale is available in a wide range of capacities. Its portability and simple operation make it a valuable tool.

Information Request Form

Model CS-2000 Crane Scale

The correctly installed crane scale lets operators do two things at once: move materials and simultaneously gather accurate weight data or inventory information.

Information Request Form

Testing Systems

	VeriTest is a computer linked, material analysis, and force testing machine.
	VeriTest lets the computer control test machine functions. The computer link also ends the need for most peripheral equipment, providing readouts of force, extensometer deflection, crosshead deflection and speed, a real time graph of force vs. deflection or stress vs. strain, instant access to material analysis values; such as, Young's Modulus, tensile strength, and yield strength.

Information Request Form

Advanced Force Gauge (AFG)

The Advanced Force Gauge (AFG) is a full-featured force gauge, which measures tension and compression force at a resolution of 1 part in 5,000. It's available in capacities from 0.55lb(250 grams) to 550lb(250 kg).

Information Request Form

Advanced Force Gauge / Torque Indicator (AFTI)

The Advanced Force Gauge / Torque Indicator (AFTI) is an electronic force or torque display for use with Dillon's Smart Transducers.

Information Request Form

DataPlot Software

The Windows based DataPlot Software delivers the full potential of Dillon test systems consisting of Dillon test stands, fixtures, and fand instruments.

Information Request Form

Compact Force Gauge

Dillon's convenient new Compact Force Gauge is pocket sized, measuring only 3 x 5.25 inches (76mm x 133mm). It is available in one capacity with selectable units of measure, 20kg / 200 N /45 lb. / 720 oz / 0.2 kn.

Information Request Form

Closure Torque Testers

The Dillon Closure Torque Tester system is a combination of fixture, smart loadcell, and an Advanced Force Gauge / Torque Indicator (AFTI). The system captures application and removal torque values in lb.-in, lb.-ft, oz-in, kg-cm, g-cm, N-m, MN-m, and N-cm. It has peak hold capability. It can supply digital and analog output. It can interface with a PC running DataPlot Software.

Information Request Form

LCP Lever-Operated Test Stand

Built to simplify repetitive testing of resilient components such as springs. A single push-pull lever provides convenient tension or compression testing. Maximum load for this instrument is 100 lb. or 50 kg. Operators of the LCP Test Stand achieve ultimate fixture alignment via adjustable gauge and base plate to assure greatest accuracy.

Information Request Form

MDD- Manual Direct Drive Test Stands

The Manual Direct Drive Test Stands feature uncomplicated handwheel operation. Ideal fixture alignment for greatest accuracy is attainable using the instrument's adjustable gauge and base plates.

Information Request Form

M5KNE Test Stand

The M5KNE is a twin column motorized test stand for tension and compression testing. A M5Kne system is capable of cyclic, single shot, and manual testing.

Information Request Form

TC² Motorized Test Stand

The TC² design features a cast base, extruded column, prestressed, high tensile tie-rods, smooth, quiet, and ball screw operation. This combination results in an exceptionally stable and robust test stand.

Information Request Form

TC² Computer Controlled

The TC² test stand as the hub of a sophisticated and fully computer controlled system. Use the process software to develop product testing routines that will streamline your tension, compression, and cyclic testing.

Information Request Form

Mechanical Force Gauges

Dillon Model X Force Gauges measure tension or compression forces. There are three versions of the Model X Force Gauge. Model X-C measures compression. Model X-ST measures tension. Model X-PP is the push-pull version which measures both tension and compression. Model X Force Gauges are available in eleven capacities of 25 to 50,000 lb. and equivalent kg capacities.

Information Request Form

Tensiometers

Monitor cable tension feeds data to a printer or computer and control automated functions with a Dillon electronic tensiometer. Designed to monitor tension loads on wire, rope, or cable; the Dillon tensiometer has been used in construction, utility companies, oil fields, and manufacturing plants.

Information Request Form

Force Control Switches

Dillon load limit DYNA-SWITCHES are the economical answer to process control weighing, automation and overload applications where electrical circuits need to be activated at a factory-activated setpoint. Capacities from 100lb to 50,000 lb. are available with 1 to 4 control switches infinitely adjustable over the entire range.

Information Request Form

FI-90 Force Indicator

An affordable versatile indicator for force measurement applications, the FI-90 Force Indicator provides both gross and peak hold readings.

Information Request Form

FI-127 Force Indicator

The FI-127 is a versatile instrument. For example, it has three standard display modes: standard, peak, and first peak. In addition, its annunciates indicate tension or compression force measurement, units of measure, motion, print, over, under, and accept. The FI-127 over and under annunciates can be used with user-defined setpoints.

Information Request Form

Wizard Programmable Force Indicator

Dillon's most flexible and advanced instrument is called the Wizard, and with good reason. It is the force indicator that will write its own legends for its flexibility, for the additional control it lends to testing procedures, and for its ability to fit itself perfectly to each application.

Information Request Form

[ Home ] [ Up ]

ED-2000 Electronic Dynamometer

Mechanical Dynamometer

Mechanical Crane Scales

Model CS-2000 Crane Scale

Testing Systems

Advanced Force Gauge (AFG)

Advanced Force Gauge / Torque Indicator (AFTI)

DataPlot Software

Compact Force Gauge

Closure Torque Testers

LCP Lever-Operated Test Stand

MDD- Manual Direct Drive Test Stands

M5KNE Test Stand

TC2 Motorized Test Stand

TC2 Computer Controlled

Mechanical Force Gauges

Tensiometers

Force Control Switches

FI-90 Force Indicator

FI-127 Force Indicator

Wizard Programmable Force Indicator

Information Request Form

Last modified: September 13, 2005

TC² Motorized Test Stand

TC² Computer Controlled